A phone holder with a clip-fixing device for a monitor/laptop/plane of sufficient thickness and strength. There is an octagon inside the clip that allows you to fix the phone and rotate it in 45-degree increments.

If your monitor has wide edges, you can use a brighter clip for a better fit.

Choose your bolt size!)

Different printers may have different tolerances, use XY bolt scaling if they are poor and very tight to engage.

Just mirror all parts of the model in order to hang the clip on the other side.

The base bolt enters both from the top and from the bottom, fixing all the details, choose what is convenient for you.

The set contains different bolts and mullions of different lengths, use mullion kits for your phone.

The set contains a key for the clip screws that are attached to the monitor; if the fixation is not tight enough, try using a rubber insert, for example made of TPU, but for me it is fixed securely without it.

Can be fixed on a plane with a thickness of 1mm-30mm.

Assembly procedure:

Press the 2 parts of the clip firmly onto the monitor or mounting plane. Tighten them with 2 screws; for convenience, you can use a wrench.

Assemble the holder using the main part and the mating part, if necessary, dial in the required length with imposts.

Place the octahedron holder into the groove.

Enjoy using it.

PRINT SETTINGS:

Material: I recommend PETG, but both ABS and PLA will do (to a lesser extent)

Layer thickness: Within 0.1-0.25 mm

Nozzle thickness: 0.4mm

Print speed and print temperature depending on material

No support required.

When printing bolts, use a border.

Phone holder for monitor laptop\noteboock

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill