Design and Model

This model is a modular tool tray for use with the standard and ultimate version of the Creality Hi- CFS overhead mount.

It features numerous modular compartments that can be attached to the main tool tray so you can have the tool tray you want.

The modular tool tray features components for:

* Large hairspray container for build plate adhesion;

* side container;

* cutter holder;

* hex holder;

* scraper holder.

You can print one or many of each. The modular tooltray can hold up to 4 components.

If you want to find out more about the Creality Hi- CFS overhead mount:

Standard version

Ultimate version

3D PRINTING

IMPORTANT – PRINT SETTINGS

I upload a print setting files for all my models. The print settings has the parts positioned for correct printing. Use “Tree Auto” as the support setting.

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more)

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm standard

Material: PLA is recommended as its more rigid. PETG or other filaments may cause the part to deform or may not work with the built-in tolerances. PLA-CF and PETG CF and other materials often print too wide and cause parts not to fit.

MODULAR TOOL TRAY FOR CREALITY HI - CFS OVERHEAD MOUNT

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill